Skip to content
Meridian Plumbing Service

Hard water

Water softeners and hard water in Meridian

Meridian's water comes from City wells, and the City's 2025 water quality report puts its hardness at around nine grains per gallon (water quality report). That is hard water, and it shows.

What hard water does to plumbing

  • White crust on faucet aerators and shower heads, which cuts the flow.
  • Scale on the bottom of a tank water heater and inside tankless heat exchangers.
  • Spots on glasses and a film on shower glass.
  • Toilet rim holes that close up over the years.

How a softener is plumbed

From the mainBypass valveResin tankControl headBrine tank (salt)Drain with an air gapWater heater
Water from the main passes through the resin tank before the water heater. The brine tank refills the resin with salt water on a schedule; a bypass valve lets you take the softener out of the loop.

A softener that stopped working

  • Check that the brine tank has salt and that the salt has not formed a hard crust over the water.
  • Check the bypass valve is set to service, not bypass.
  • Look at the control's clock and settings after a power cut.

If water is running to the drain all the time, or the resin tank is leaking, it needs a plumber or the softener's own service company.

Adding a softener

The softener goes on the main line before the water heater, needs a drain for its backwash and a power outlet, and usually leaves an outside faucet or two on hard water for irrigation. The plumber connects it; the size depends on how much water the household uses and the hardness.

  • Which taps will stay on hard water?
  • Where will the drain line go, and is there an air gap?
  • Who services the unit, and how is the setting matched to our water?
Call (208) 555-0135